What Are Individual Throttle Bodies And Why Might You Want Them?

You might have heard people wax lyrical about ITBs in the past, but what do they actually do? Allow us to explain
What Are Individual Throttle Bodies And Why Might You Want Them?

Individual throttle bodies or ITBs might just be the ultimate naturally-aspirated tuning option. As well as looking and sounding incredible, this is in theory the ideal setup. With each cylinder getting its own throttle valve, both power and response are improved. And did I mention the sound?

What are individual throttle bodies?

What Are Individual Throttle Bodies And Why Might You Want Them?

To answer this, we’re best off looking at a more conventional setup first. Normally, air comes in through some ducting, passing through a filter and entering an inlet manifold that operates a partial vacuum via a single throttle body. From here, the air is sucked into the inlet ports for each cylinder via a series of channels. The air is mixed with fuel, ignited fire a spark, and hey presto - internal combustion has occurred.

Individual throttle bodies, as the name partly implies, involves using a throttle body for each cylinder, all linked by one throttle cable. Where an airbox is used, it contains atmospheric pressure rather than a vacuum. Instead, a vacuum line runs from a vacuum box/chamber it each of the intake runners right near the throttle bodies.

What are the benefits of individual throttle bodies?

GTO Engineering's all new Ferrari-inspired V12 for the 'Squalo', featuring 12 individual throttle bodies
GTO Engineering's all new Ferrari-inspired V12 for the 'Squalo', featuring…

With the conventional setup described above, the air has much further to travel from the single throttle body to the inlet ports. Plus, this distance varies for each cylinder. With the ITB setup, there’s a more direct and identical path for air to reach the inlet ports.

This makes for a much sharper throttle response, and thanks to the more efficient way in which air is being fed to the combustion chambers, an increase in power. Plus, it’s possible to ditch the airbox entirely, since all it’s holding is atmospheric air. Some setups feature a simple foam filter covering intake runners, while others leave them completely exposed.

Those are the facts, but there are some more subjective improvements too. The first is looks - whether they’re left open to the elements or not, there’s something purposeful and racey about a set of ITBs nestling under your bonnet. The second is noise - that more direct, consistent path for intake air often makes for a throatier engine note. This is perhaps most effective on inline-four engines, turning what was a relatively ordinary four-pot induction noise into something all brawny and angry.

What are the disadvantages?

What Are Individual Throttle Bodies And Why Might You Want Them?

If ITBs are so good, you might be thinking, why aren’t they on all cars? Primarily, it’s cost. Having four, five, six, eight, 10 or 12 throttle bodies as opposed to one adds a lot of moving parts and complexity before you’ve even thought about plumbing in a vacuum line.

Are aftermarket ITBs worth it?

What Are Individual Throttle Bodies And Why Might You Want Them?

The money issue is present for anyone mulling over an aftermarket ITB setup too. Gains will vary wildly from car to car, but as a general rule, this is an expensive way to add power if we’re considering pounds/dollars per brake horsepower.

The BBR GTI NC Mazda MX-5 ITBs we tried out earlier this year, for example, cost £2250 and on their own add around 20bhp. You need to be sold on the noise and the looks, and/or be determined to increase power without the use of forced induction before considering a setup like this.

Production cars with individual throttle bodies

What Are Individual Throttle Bodies And Why Might You Want Them?

Being a costlier setup to mass produce, individual throttle bodies are something you’ll often see on more exotic performance cars. Ferrari, for instance, used them on the F40, F50 and F355, among many others further back in the Italian firm’s history. That’s not to say ITBs have never made it onto more attainable stuff, however.

BMW‘s M Division has a long history of sticking ITBs on its naturally-aspirated engines, with the S38, S52 and S54 inline-sixes, the S65 V8 and the S85 V10 among those receiving the ITB treatment. A particularly odd case is the SR20DETT found in the Pulsar GTI-R - it has individual throttle bodies, despite Nissan only giving the turbocharged inline-four a single throttle setup in the famed S-chassis models.


No comments found.


Sponsored Posts