What Are The Main Types Of Brake Pad, And Which Is Right For You?

Being able to stop quickly is much more important than acceleration, so picking the right brake pad is a vital part of any car modification process
What Are The Main Types Of Brake Pad, And Which Is Right For You?

As you all know, a car’s stopping power can be just as important as any horsepower figure or torque output. When you’re going for a weekend hoon and approach your favourite string of corners, you want to have full confidence that the application of your foot to the middle pedal will create a corresponding braking force.

At the same time, there is only a certain amount of stopping force that your brakes can create. Brakes are specced taking into account a vehicle’s weight and power, with the aim being to create enough force to fully lock up all four wheels, overcoming the torque of the spinning brake disc. From there on in, it’s then down to the tyres to produce the required friction force to bring the car to a stop. So there’s no point in having race-spec brakes coupled with some cheap recycled street tyres.

Remote video URL

To maximise the grip that the pads can have on the rotors, different materials can be used within the pad compound to match the braking and temperature demands. In the end, the figure that matters most is the coefficient of friction between the brake pad and the rotor, as this is the main factor that converts the kinetic energy of the spinning brake disc into thermal energy, otherwise known as heat.

The retention of that heat energy is governed by the thermal conductivity of the material. Brake pads have specific operating temperature ranges, and constant hard braking can result in the pads overheating if they can’t dissipate the heat to the surroundings quickly enough, therefore a high thermal conductivity is required.

To put all of that into perspective, here’s a quick run-down of the different types of brake pads, looking into the characteristics of each to help you pick the right material for different motoring scenarios.

Non-metallic (organic)

What Are The Main Types Of Brake Pad, And Which Is Right For You?

The softest form of brake pad, non-metallic pads are made up of different combinations of glasses, rubbers and resins like cellulose along with a small smattering of metal fibres that are all manufactured and cured to withstand a substantial amount of heat. The composite that results is relatively soft and therefore wears away quickly, but is easy on brake discs. This makes them poor for anything other than daily road driving, and even then a more metal-based pad is preferable to avoid frequent replacement.

The accelerated wear of organic pads results in large amounts of brake dust covering nearby components which can also become a bit of a pain. Originally constructed from Asbestos (due to its talent for dissipating heat) non-metallic pads were swiftly switched to other compounds due to the health and safety issues revolving around the toxic material once airborne.

The nature of the new compounds mean that this type of pad should only really be used in applications where large brake demands are rarely needed. Purely organic brake pads can be found that use rubber or glass composites but they wear out quickly if used regularly. Kevlar pads are the expensive alternative - being six times stronger than steel - and provide far less performance drawbacks for an organic pad.


What Are The Main Types Of Brake Pad, And Which Is Right For You?

These are found in the majority of cars being sold today. They use a combination of both synthetics and metals to form a predominantly metallic hybrid compound. Once the material of the fibres has been chosen, they are bound together using an organic resin. They are then moulded into pre-set shapes and baked in a furnace for three to five hours to enhance their durability.

The metal element to the compound makes them more resistant to heat and wear than the purely organic variants, but as metal has a lower friction coefficient at low temperatures to the more pliable synthetic material, a tad more pedal power is needed to create the same braking force with the semi-metallic pads when cold.

Stats for semi-metallic pads via Edge Autosport
Stats for semi-metallic pads via Edge Autosport

Adding more metal to the compound (around 60 per cent) can make metallic pads suitable for heavy braking situations where longevity is needed over the presence of organic material. This high spec is perfect for performance cars and heavy vehicles that constantly need large braking forces to wick kinetic energy from large rotors rotating quickly due to high torque inputs.

Typically made using either sintered steel, graphite or iron, semi-metallic brake pads have a high thermal conductivity and – when combined with proper brake ducting for cooling – can be everything a high performance car needs to cope with, even on the most intense of track days.


What Are The Main Types Of Brake Pad, And Which Is Right For You?

But if a set of steel pads still leads to brake fade as overheating sets in, then maybe shelling out for a set of full ceramic brake pads is worth it. Confined to the most expensive of supercars due to the sheer expense of manufacture, the ceramic compound used in these high-spec pads is exceedingly good at absorbing heat generated from very hard, continuous violent braking.

This means that they can continually recover from whatever demands are placed upon them, even in such events as endurance racing. This feature however makes ceramics difficult to warm up to operating temperature which can prove a hindrance for daily driving.

The use of clay within the ceramic gives these pads the benefit of the high coefficient of friction of an organic pad when cold combined with the strength and durability supplied by the presence of a small percentage of copper moulded into the compound.

Stats for ceramic pads, via Edge Autosport
Stats for ceramic pads, via Edge Autosport

Every type of brake pad has its downsides; organic pads are normally too soft for general use, metallic pads are very hard on brake discs and create more noise and dust and ceramics are catastrophically expensive, along with taking forever to heat up. But the choice of what compound to go for all comes down to the application.

For example, having high-temperature steel or ceramic pads on a street car would be wasteful considering the pads will rarely – if ever – get up to their optimum performance temperature. Then again, if you were to undertake some serious mountain or track driving with stock metallic or organic pads, you’d risk them overheating and making that brake pedal feel frighteningly long. In sprint racing, coefficient of friction is priority, while in endurance racing, longevity is paramount without throwing frictional properties out the window.

Yellowstuff brake pads sold by EBC are a popular choice for cars ranging from hot hatches to full-blown muscle cars
Yellowstuff brake pads sold by EBC are a popular choice for cars ranging…

Brake pad manufacturers will often give a range of pads suited for every application. EBC, for example, use a colour-coded system, with Greenstuff pads increasing braking performance by 15 per cent when compared to an average stock pad, Redstuff pads adding a ceramic element for fast road cars and then minimum-fade Yellowstuff pads used in performance cars that find themselves on a track day now and then. Other manufacturers like Tarox will provide similar compound varieties using names like strada, corsa and track for you to choose from.

Remote video URL

Changing your brake pads to something a tad more performance-orientated can be a simple and cheap modification to bring your car’s stopping power in line with the driving force under the bonnet. But with countless factors like rotor interaction, thermal conductivity and usable coefficient of friction all coming into play, it’s worth doing some research into the exact spec of compound that is usable for you. Brakes – like tyres - are an area that should never be neglected. So when you finally decide to go on that epic road trip or to track your car for the first time, make sure your pads are up to the job.

Have you changed your brake pads recently? Have you upgraded the compound to something a bit more track-biased? Comment below with your brake pad setup!


StuStuStuwart (WagonSquad)

It’s 7:30 in the morning, and already posting such a technical article? Come on, I haven’t even drank my first cup of coffee, give me a break. (pun intended)

12/28/2016 - 06:37 |
176 | 6

No its still 7:11 in Los Angeles

12/28/2016 - 15:11 |
6 | 4

03:07 in Germany:D

12/29/2016 - 02:07 |
2 | 0
Kyle Ashdown

Excellent article, as usual! One thing I will point out is that although car manufacturers generally don’t use asbestos in their brake pads anymore, it’s still pretty common in aftermarket brake pads.

Stay safe, wrench-turners.

12/28/2016 - 06:45 |
64 | 2

A little asbestos is good for the soul (sarcasm)

12/28/2016 - 13:01 |
6 | 2

Well if I die a few days sooner in my old age because of it, I die happy.

12/28/2016 - 14:32 |
2 | 0
slevo beavo

I run yellowstuff in my Skoda coupled to my tarox 6 pots. They’re awful when the cold and not that great on track in terms of feel and retardation. However they don’t fade what so ever, even managed a stint of 30 laps of brands with no trouble.

I’m going to swap them out for some standard brembo pads and invest in some track only pads for when I do go.

12/28/2016 - 07:21 |
18 | 2

Atleast its brembo
Because if its brembo = such brakes.

12/28/2016 - 08:33 |
4 | 2

Actually Brembo isn’t that good on motorbikes. I had massive 4-piston Brembo calipers on my Husqvarna 2-stroke and the front brake wasn’t that good, I swapped it for a 6-piston Tokico with a floating disc

12/28/2016 - 09:09 |
8 | 0

Very informative article. I used to have green stuff on my mx5 and they were terrible. They were defiently worse than oem pads on track so i switched to yellow stuff which were much better than the greens but there wasnt a big difference between these and the oem pads.

12/28/2016 - 09:58 |
6 | 2

Stick some proper pads on like carbotech XP8 or Mintex F4-R and they’ll be night and day difference.

01/16/2017 - 20:43 |
0 | 0

use sandals to stop. they are better

12/28/2016 - 10:07 |
20 | 4

In reply to by Anonymous (not verified)


12/28/2016 - 12:03 |
0 | 10

I was reading too fast, maybe need to slow down

12/28/2016 - 14:17 |
10 | 2
Saku Hynynen

The best brake pads with stock calibers and disc i have ever used are endless. They just grip so well and another good brand is CH Brakes they are like endless but endless has better feel in my opinion

12/28/2016 - 15:32 |
2 | 0
Michael R. T. Jensen

Big brake kit slotted and drilled rotors + racing compound ceramic pads + wide ultra high performance tires + 2,500 pound Focus = I stop whenever I want to.

12/28/2016 - 16:20 |
20 | 4

Actually slotted and drlled rotors reduce braking power.

12/29/2016 - 01:37 |
2 | 12

Good article, i find it extremly usefull ;)

12/29/2016 - 00:09 |
2 | 0


Sponsored Posts