How do I test an ignition coil without a multimeter?

Sponsored Posts

Comments

Anonymous

Take the plugs and crank the engine with the plugs against ground metal. If they all spark, all your ignition system is ok

05/18/2016 - 20:49 |
0 | 0
grayson macintosh

There is no spark at the plugs, I was thinking the coils the problem but I’d like to check first

05/18/2016 - 20:52 |
0 | 0
Anonymous

Is it a coil on plug? Or just 1 coil

05/18/2016 - 21:06 |
0 | 0
grayson macintosh

1 coil

05/18/2016 - 21:08 |
0 | 0

Just get a multimeter. They’re not expensive. Or borrow one from a friend

05/19/2016 - 08:29 |
0 | 0
Anonymous

You could always try to lick it and see if it shocks you!!

05/19/2016 - 17:44 |
0 | 0
grayson macintosh

In reply to by Anonymous (not verified)

I’ve actually given that serious thought

05/19/2016 - 17:45 |
0 | 0
Anonymous

Try changing the spark plug. If sparks everything’s ok and if not gotta replace the coil

05/19/2016 - 20:30 |
0 | 0
project_f-body

If you see no spark when you havr the wire off going to a ground chances are the coil is bad.

05/19/2016 - 22:19 |
0 | 0