That Time Chevrolet Made A Corvette With A 9.8 Marine V12

The Corvette 'Falconer' ZR12 was intended to take on the original Dodge Viper, but it never made production
That Time Chevrolet Made A Corvette With A 9.8 Marine V12

In 1989, Chevrolet was busy readying its all-new Corvette ZR-1. With help from then-GM subsidiary Lotus, the C4 ‘Vette was about to be turned into a car to take on the supercar elite, making up for some of the generation’s more underpowered efforts.

Chevy had a problem, however - at the 1989 Detroit Auto Show, Dodge revealed its concept version of the Viper. Packing a monstrous 8.0-litre V10, it threatened to urinate all over the ZR1’s bonfire with a production version offering serious firepower at a still very attainable price. Something had to be done.

Remote video URL

In response, Chevrolet’s engineers decided to go one better. Well, two, technically - the idea was to offer a pair of additional cylinders relative to the Viper. The Corvette ‘ZR12’ - detailed above in a new video from YouTube channel ‘DtRockstar1’ - was lengthened by around 200mm, making room for a whopping 9.8-litre (600 cubic inches) V12 from Falconer Racing Engines.

Intended primarily for aviation and marine use, this Goliath-spec engine is - according to Falconer’s website - still available today. Its capability is still impressive in 2020 too, with the version fitted to the ZR12 good for 686bhp and 680lb ft of torque.

The prototype ZR12 was tested by Ryan Falconer himself. Thanks to the engine’s aluminium block (the V8 normally found in its place had an iron block) it wasn’t even that heavy, tipping the scales under 1600kg - about the weight of a BMW M2 Competition. ‘Conan the Corvette’ - as it was nicknamed - was lent out to various car publications, where it made a mark. Motor Trend referred to the note of its original side-mounted exhaust pipes “Satan’s own serenade”.

Fully Vetted Episode 9: The Falconer

When the Dodge V-10 powered Viper along and challenged Corvette’s status of being America’s only sports car, Corvette engineering teamed up with Ryan Falconer to create the ZR-12 “chassis study” car that would become known as Conan the Corvette. For this week's episode of Fully Vetted, join Museum Curator Derek Moore for a look back on a time when more was more (cylinders that is).

Posted by National Corvette Museum on Tuesday, April 21, 2020

A production car would have been incredible, but there were issues with keeping the prototype cool. We should imagine a lengthened C4 Corvette with nearly 700bhp was more than a little wild to drive too, but there was a more fundamental stumbling block - to be financially viable, the price tag would have been huge. The whole point of the Corvette was affordable performance, and the ZR12 didn’t fit with that. As awesome as the idea was, asking people to part with supercar cash for a C4 was a tall order.

And so, the prototype spent years sat around not doing a whole lot. However, the Corvette curio - now in possession of the National Corvette Museum in Bowling Green, Kentucky - was brought up to running condition a few years ago, meaning “Satan’s own serenade” can be heard once more.

Source: YouTube via Auto Evolution, National Corvette Museum


Mark Stanton

I remember seeing the Falconer in 2010 visiting the museum. Had no idea it existed until I saw it, and it was definitely a highlight of the visit for sure.

09/01/2020 - 10:21 |
6 | 0

It shows you just how unusual that car is, it would have been nice to see it go into full production but sadly it was a running prototype only

09/01/2020 - 12:23 |
0 | 0
Robert Gracie

600 Cubic Inches…..thats Freedom Overload!

09/01/2020 - 11:04 |
0 | 0

Don’t even think about it, Rob Dahm

09/01/2020 - 14:07 |
12 | 0
Robert Gracie

In reply to by Ulysse

I agree!! Rob Dahm needs to be restrained in chains of iron from this engine!

09/01/2020 - 20:34 |
0 | 0


Sponsored Posts