ABS/ASC & Handbrake light on dashboard.

Hi guys, so I have a problem with a certain part of the car. All three lights are on, and on closer inspection with a C110 scanner threw up these codes. Can anyone shed some light on what these could mean?? I thank you in advance. 🙃

Sponsored Posts

Comments

Jim bling

Seems like it can’t read the ecu or it’s been swapped out

12/04/2018 - 23:54 |
0 | 0

I see, different ECU in the car, can this be fixed ?

12/04/2018 - 23:55 |
0 | 0
BullBar

Have you tried clearing the cides and see if they pop back up? Also you can unplug and plug back in your DME (behind the glovebox, 3 plugs about the size of a VCR tape remember those?) Failing that check fuses and DME wiring. Not all those codes are necessarly linked

12/05/2018 - 07:18 |
1 | 0
Anonymous

okay il try that, the one that I’m interested the most is the 5DF5. Could this be related to a failed ABS and thus causing the lights to show up?

12/05/2018 - 07:35 |
0 | 0
BullBar

Which 3 lights, the centre DSC the brake and handbrake? Do you have a pic of the dash lights?

12/05/2018 - 12:09 |
0 | 0
Anonymous

I’m at work but il get one of the internet that look the same, I think it’s know as the trifecta, not sure.

12/05/2018 - 12:34 |
0 | 0
Anonymous

Swap the sensor, the rear right one, that worked for me. Btw does it affect the car behavior?

12/05/2018 - 16:17 |
0 | 0
Anonymous

In reply to by Anonymous (not verified)

I’m going to check if the data stream will show all wheel sensors working first.

12/06/2018 - 20:30 |
0 | 0
Anonymous

To be fair, the car drives lovely, just a shame about these lights, I’m aware this is a MOT failure and, it be nice to have the safety net of ABS on as well. So I should check all the wheel speed sensors first ?? 🤔

12/05/2018 - 16:20 |
0 | 0
Jim bling

You need another programme/scanner to do it can’t remember off the top of my head but try reset the lights with the c110

12/05/2018 - 22:57 |
0 | 0
Anonymous

Tried it, I cleared other codes with no hassle, but these will straight up come back.

12/05/2018 - 22:59 |
0 | 0
Anonymous

Okay il try and get someone with a better scanner to read these codes.

12/05/2018 - 23:00 |
0 | 0