Alright, not sure if you mean me 😂 but i’ll try to give you some tips.
Cheating: Hold the printout of your car against a window and sketch the shape.
Attention to detail: Fill in the details as accurate as possible. This may take a while, but that’s okay!
(3.) Colour it: Shading is quite hard and i would only recommend it for advanced drawers. Also you need the right material. Either markers, pencils or colour pencils in tons of different colours.
PRACTICE: You will notice that you’re getting better with every car you draw.
Thanks m8, also do you suggest me any drawing tutorial channels?
I cheat too sometimes :O
Your lines are bushy, try to simulate the line before you touch paper, like here: https://www.youtube.com/watch?v=eDWK1PWbyS8 Btw this YT channel is good, but you’ll find here general tutorials, not only for cars.
If you have some time at parking lot try to draw even details of car, eg only headlight, mirror etc… You may buy a notebook with blank pages and carry it everywhere ;)
Nice bugatti eb110, (just kidding), but don’t give up, you r in the right way to get better!
Lol i tought the same after finishing it. Thanks!:D
Try to keep it symmetrical and keep practicing.
You know what bro. That’s is not that bad. Do you you know what you should do? Keep that drawing. Practice a lot. And then draw that same pic again. You’ll definitely see how practice makes perfect.
I’m not too good in drawing myself, but I can tell you one or two things you need to work on:
Don’t over-exaggerate the lines too much, meaning when you see a slight curve, don’t too round of a line, as you did with the front of the car. Also, for the body kits, the front and rear fenders don’t stick out as much as much in the photograph.
If I were to draw this, it would be easier for me to start with the front lip or windshield because those two are the biggest things on the car, so it gives you a goo perspective on how big the other parts should be in comparison.
Attached is a rough sketch of what the basic overall shape should look like. I drew above your drawing to kind of show you what you should change.
Sorry if my words and sketch are unprofessional. I have never taken drawing classes, so I don’t know how to use any artistic terms to explain. I hope I helped. If you have more questions I could definitely answer those for you. Good luck! :)
You think you suck? I can draw funny looking concepts from the side out of a cartoon, in 2d… They suck… You sir are good..
You are also a beginner so you will get better over time….
Comments
Alright, not sure if you mean me 😂 but i’ll try to give you some tips.
Cheating: Hold the printout of your car against a window and sketch the shape.
Attention to detail: Fill in the details as accurate as possible. This may take a while, but that’s okay!
(3.) Colour it: Shading is quite hard and i would only recommend it for advanced drawers. Also you need the right material. Either markers, pencils or colour pencils in tons of different colours.
Thanks m8, also do you suggest me any drawing tutorial channels?
I cheat too sometimes :O
And feel free to ask anything :D
Oh, thanks a lot. It will be very helpful
Nice bugatti eb110, (just kidding), but don’t give up, you r in the right way to get better!
Lol i tought the same after finishing it. Thanks!:D
Try to keep it symmetrical and keep practicing.
You know what bro. That’s is not that bad. Do you you know what you should do? Keep that drawing. Practice a lot. And then draw that same pic again. You’ll definitely see how practice makes perfect.
Thanks man! :)
If you can’t fight ‘em, join ‘em
If you can’t draw ‘em, copy ‘em!
Qian Li
I’m not too good in drawing myself, but I can tell you one or two things you need to work on:
Don’t over-exaggerate the lines too much, meaning when you see a slight curve, don’t too round of a line, as you did with the front of the car. Also, for the body kits, the front and rear fenders don’t stick out as much as much in the photograph.
If I were to draw this, it would be easier for me to start with the front lip or windshield because those two are the biggest things on the car, so it gives you a goo perspective on how big the other parts should be in comparison.
Attached is a rough sketch of what the basic overall shape should look like. I drew above your drawing to kind of show you what you should change.
Sorry if my words and sketch are unprofessional. I have never taken drawing classes, so I don’t know how to use any artistic terms to explain. I hope I helped. If you have more questions I could definitely answer those for you. Good luck! :)
You think you suck? I can draw funny looking concepts from the side out of a cartoon, in 2d… They suck… You sir are good..
You are also a beginner so you will get better over time….