Hello I'm planning to turbocharge a 1.3 l Suzuki Jimny

Any Suggestions? (Enough power to accelerate it to 60’mph in 7-8 seconds)

Sponsored Posts

Comments

Anonymous

I don’t have any suggestions, but I wanted to say that sounds awesome!

08/03/2016 - 00:35 |
0 | 0
Nassim 1

Good luck man! Android are you the first one to do this

08/03/2016 - 05:38 |
0 | 0
Anonymous

Engine swap maybe? 2jz in jimmy? LS9?

08/03/2016 - 06:47 |
0 | 0
Ben Chrissy

In reply to by Anonymous (not verified)

Nah, I don’t want too much power, that’s why I’m turbocharging it

08/03/2016 - 09:46 |
0 | 0
Anonymous

Make sure that the engine can take the pressure

08/03/2016 - 13:01 |
0 | 0
Ben Chrissy

In reply to by Anonymous (not verified)

Sure, I’m thinking of a MHI turbo

08/03/2016 - 14:02 |
0 | 0
J Bennett

Slieve the block, I really doubt it will be able to take the boost in stock form. While you’re at it, I would guess you will need to replace a lot of internals, the piston rings will go really quickly, so be prepared to replace them. You will definitely need stronger valves, probably need stronger con rods, and you will need to get the cams reprofiled if you want to actually make it quick. If you have seen Haggard Garage or any copycat/affiliate channels, you will see that you can just strap a turbo on, but in your case just doing this won’t work because you will make absolutely no extra power this way, and you will need a fair bit of extra power to get a Jimny to accelerate like that. Good luck :)

08/03/2016 - 20:19 |
1 | 0

Ok, thanks for the advice

08/03/2016 - 21:31 |
0 | 0