Anyone know how much brake fluid goes into an IS200?

When I finally get down to rebuilding and upgrading the brakes I want to drain the complete brake system and fill it with Dot 5.1. However I can’t seem to find how much fluid the brake system holds. I must admit I haven’t searched for very long to get my answer, but maybe there is someone here who has done it or just knows. If that is the case that would be great and it would save me a lot of time.
Thanks in advance guys!

Comments

Eric Mark X

Gewoon Dot4 erin dumpen. En meer dan een liter heb je niet nodig. Kroonoil.nl is je beste vriend als het om vloeistoffen gaat.

06/15/2016 - 12:15 |
0 | 0

ik ben koppig en wil dot 5.1

06/15/2016 - 12:54 |
0 | 0
2jzmecrazy

Just a tip if it hasn’t been mentioned already, don’t drain the master cylinder fully unless you plan on resetting the proportioning valve which could get stuck, safer bet to bleed the old fluid out while adding new fluid to keep the reservoir full.

06/17/2016 - 00:38 |
2 | 0

I thought that’s the basic procedure? I’ve never completely drained a brakesystem. It’s a B*tch to get all the air out of it if it’s completely empty.

07/04/2016 - 21:19 |
1 | 0

Sponsored Posts