This Is Michelin’s New, £555 One-Piece Wheel And Tyre

If you like the idea of a puncture-proof off-road tyre, Michelin’s new ‘Tweel’ could be just what you need
Remote video URL

What you’re looking at is the (finally) commercially available one-piece tyre and wheel, made by Michelin. Called the Tweel – combining ‘tyre’ and ‘wheel’ – it’s designed for small industrial vehicles and the increasingly mad Utility Terrain Vehicles (UTVs) that take part in sports like rock crawling.

Fitted in place of a traditional two-piece wheel and pneumatic tyre, the Tweel can deform readily over tough terrain for a greater contact patch, and since there’s no air chamber it can’t be punctured. The examples in the video above are built for industry, but the concept is the same.

Remote video URL

The UTV product you can now buy (below) is built in 4x137 and 4x156 bolt arrangements, with more on the way. It’s a 26-inch solid rubber construction that bends where needed and can be bumped up all the kerbs you like with no harm done. It also offers even greater cushioning than a regular tyre and lasts a lot longer because it’s less vulnerable. Your $750-per-corner investment is safe.

Though the clever little gripper is limited to 37mph, it’s perfect for a long service life of biffing around construction yards where nails, glass or scrap metal can all pose frequent and stabby problems for air-filled tyres.

This Is Michelin’s New, £555 One-Piece Wheel And Tyre

Concept versions have been finding their way into YouTube videos for years, but, as we understand it, only recently has the company finalised the design and formally made it available to the public.

The Tweel isn’t likely to see duty on cars, because most cars’ wheel arches don’t have enough room for the Tweel’s deformation. Excess tyre bending isn’t really all that good for handling, either, and would confuse the hell out of modern active suspension systems…

Comments

Seth 3

That thing bothers my OCD

05/17/2018 - 13:26 |
86 | 0
5:19.55

Would it fit Floyd the Jaaaaaag?

05/17/2018 - 13:45 |
38 | 0

AlexKersten make it happen. Sponsored video by Michelin

05/17/2018 - 18:33 |
12 | 0
Rahul 1

Tire companies in the future be like: Presenting the all new “Whyre”!!! sounds more like, “Where”.

05/17/2018 - 14:00 |
16 | 0
Anonymous

[DELETED]

05/17/2018 - 14:04 |
0 | 0
ᴶᵘˢᵗᴬᴿᵃⁿᵈᵒá

In reply to by Anonymous (not verified)

Thanks for the nightmare

05/17/2018 - 14:05 |
2 | 0
Anonymous

I quite like the name..

05/17/2018 - 14:16 |
2 | 0
eXoZGaming

These look like they grip really well, im looking forward to seeing these being designed for cars and seeing the performance of them compared to the regular tires that we have

05/17/2018 - 14:20 |
0 | 0

Bridgestone is doing exactly that

05/17/2018 - 14:46 |
2 | 0

Look for the tweel tests in a car, when this idea came out, they bolt them into an Audi A4, the results were: you have to change whole suspension cause they were too stiff and needed to harden materials, meaning adding weight, also, unbearable noise at +55kmh because of design, good thing was that you can redo the whole thread twice to increase lifespan

05/17/2018 - 15:22 |
4 | 0
BoostAddict 1

This is actually really old technology.

05/17/2018 - 17:21 |
2 | 2

Ikr ?? The wheel has existed for thousands of years so like ??

05/19/2018 - 11:17 |
0 | 0
BackroadRipper

I’ve used these tires before and they help minimize the jolt of a bump dramatically

05/17/2018 - 18:13 |
2 | 0
CS55

At first I thought, what is a jet engine doing in the thumbnail lol

05/17/2018 - 18:32 |
4 | 0
Matthewg371

Hey bro

05/18/2018 - 05:17 |
2 | 0

Topics

Sponsored Posts