Engineering Explained: Cold Air Intakes Vs Short Ram Intakes

Cold air intakes and short ram intakes are some of the most common modifications when looking to increase horsepower, but do either of them actually do anything?

Short Ram Intake - Acura Integra GS

Before getting into testing out these common aftermarket upgrades, it’s best to understand what each of these performance upgrades is attempting to achieve. Cold air intakes and short ram intakes both have the same goal, which is to increase horsepower. But they go about it in different ways.

Short ram intakes (SRI) look to increase power by reducing the amount of restriction on the intake air. In many vehicles, the intake air passes through a resonator and silencer box to help reduce induction noise. This restriction can limit airflow. A short ram eliminates the resonator and filter box, giving the air a short travel distance and hopefully increasing power. That said, it’s pulling air from the engine bay, thus the intake air will be warmer than by using a cold air intake.

Stock Intake System - 1999 Acura Integra GS

Cold air intakes (CAI) look to increase power by moving the location which the engine pulls in air from inside the engine bay, to outside the engine bay. Many vehicles do this already, so you can see why it may seem a bit silly to shell out some money on this upgrade. Air outside of the engine bay is cooler, thus denser and carrying more oxygen, so it will allow the engine to burn more fuel and produce more power. That’s the theory, at least.

Stock intake pulls from within the engine bay on this 1999 Acura Integra GS

So, do either of these items work? Let’s check out the short ram first.

Below is a quick summary of the results. The acceleration tests are split into 1000rpm sections. For example, 2k-3k is the amount of time it takes for the vehicle to accelerate from 2000 to 3000rpm in the noted gear. As you can see, there were negligible gains at low rpm, a near three per cent decrease in mid rpm acceleration, and a 2.4-3.3 per cent improvement in high rpm acceleration.

Considering the SRI pulled air from the engine bay and still saw some performance gains, perhaps the CAI will perform better.

Looking at the results, low rpm suffered while anything over 3000rpm appeared to have better acceleration, up to 4.64 per cent from 4000rpm to 5000rpm.

Now that we have the results of both, is one better than the other?

Below 3000rpm the CAI is worse than the SRI, though it’s significantly better from 3000-5000rpm, where it then tapers off and the difference is negligible after 5000rpm.

So, let’s sum everything up and talk about why you might want each possible option.

1999 Acura Integra GS - Cold Air Intake

Plenty of people have asked why I performed this test since Mighty Car Mods already did. Well, the tests are actually quite different, and both provide valuable information. Here’s what I did differently:

Check out Engineering Explained’s previous articles:

  1. The pros and cons of different engine types.
  2. The pros and cons of superchargers vs turbochargers.
  3. Inline 5, V10, and rotary engines.